5: STL Algorithms

The other half of the STL is the algorithms, which are templatized functions designed to work with the containers (or, as you will see, anything that can behave like a container, including arrays and string objects).

The STL was originally designed around the algorithms. The goal was that you use algorithms for almost every piece of code that you write. In this sense it was a bit of an experiment, and only time will tell how well it works. The real test will be in how easy or difficult it is for the average programmer to adapt. At the end of this chapter you’ll be able to decide for yourself whether you find the algorithms addictive or too confusing to remember. If you’re like me, you’ll resist them at first but then tend to use them more and more.

Before you make your judgment, however, there’s one other thing to consider. The STL algorithms provide a vocabulary with which to describe solutions. That is, once you become familiar with the algorithms you’ll have a new set of words with which to discuss what you’re doing, and these words are at a higher level than what you’ve had before. You don’t have to say “this loop moves through and assigns from here to there ... oh, I see, it’s copying!” Instead, you say copy( ). This is the kind of thing we’ve been doing in computer programming from the beginning – creating more dense ways to express what we’re doing and spending less time saying how we’re doing it. Whether the STL algorithms and generic programming are a great success in accomplishing this remains to be seen, but that is certainly the objective.

A concept that is used heavily in the STL algorithms is the function object, which was introduced in the previous chapter. A function object has an overloaded operator( ), and the result is that a template function can’t tell whether you’ve handed it a pointer to a function or an object that has an operator( ); all the template function knows is that it can attach an argument list to the object as if it were a pointer to a function:

} ///:~

The template callFunc( ) says “give me an f and an x, and I’ll write the code f(x).” In main( ), you can see that it doesn’t matter if f is a pointer to a function (as in the case of g( )), or if it’s a function object (which is created as a temporary object by the expression UFunc( )). Notice you can only accomplish this genericity with a template function; a non-template function is too particular about its argument types to allow such a thing. The STL algorithms use this flexibility to take either a function pointer or a function object, but you’ll usually find that creating a function object is more powerful and flexible.

The function object is actually a variation on the theme of a callback, which is described in the design patterns chapter. A callback allows you to vary the behavior of a function or object by passing, as an argument, a way to execute some other piece of code. Here, we are handing callFunc( ) a pointer to a function or a function object.

The following descriptions of function objects should not only make that topic clear, but also give you an introduction to the way the STL algorithms work.

Just as the STL classifies iterators (based on their capabilities), it also classifies function objects based on the number of arguments that their operator( ) takes and the kind of value returned by that operator (of course, this is also true for function pointers when you treat them as function objects). The classification of function objects in the STL is based on whether the operator( ) takes zero, one or two arguments, and if it returns a bool or non-bool value.

Generator: Takes no arguments, and returns a value of the desired type. A RandomNumberGenerator is a special case.

UnaryFunction: Takes a single argument of any type and returns a value which may be of a different type.

BinaryFunction: Takes two arguments of any two types and returns a value of any type.

A special case of the unary and binary functions is the predicate, which simply means a function that returns a bool. A predicate is a function you use to make a true/false decision.

Predicate: This can also be called a UnaryPredicate. It takes a single argument of any type and returns a bool.

BinaryPredicate: Takes two arguments of any two types and returns a bool.

StrictWeakOrdering: A binary predicate that says that if you have two objects and neither one is less than the other, they can be regarded as equivalent to each other.

In addition, there are sometimes qualifications on object types that are passed to an algorithm. These qualifications are given in the template argument type identifier name:

LessThanComparable: A class that has a less-than operator<.

Assignable: A class that has an assignment operator= for its own type.

EqualityComparable: A class that has an equivalence operator== for its own type.

The STL has, in the header file <functional>, a set of templates that will automatically create function objects for you. These generated function objects are admittedly simple, but the goal is to provide very basic functionality that will allow you to compose more complicated function objects, and in many situations this is all you’ll need. Also, you’ll see that there are some function object adapters that allow you to take the simple function objects and make them slightly more complicated.

Here are the templates that generate function objects, along with the expressions that they effect.

Name	Type	Result produced by generated function object
plus	BinaryFunction	arg1 + arg2
minus	BinaryFunction	arg1 - arg2
multiplies	BinaryFunction	arg1 * arg2
divides	BinaryFunction	arg1 / arg2
modulus	BinaryFunction	arg1 % arg2
negate	UnaryFunction	- arg1
equal_to	BinaryPredicate	arg1 == arg2
not_equal_to	BinaryPredicate	arg1 != arg2
greater	BinaryPredicate	arg1 > arg2
less	BinaryPredicate	arg1 < arg2
greater_equal	BinaryPredicate	arg1 >= arg2
less_equal	BinaryPredicate	arg1 <= arg2
logical_and	BinaryPredicate	arg1 && arg2
logical_or	BinaryPredicate	arg1 || arg2
logical_not	UnaryPredicate	!arg1
not1( )	Unary Logical	!(UnaryPredicate(arg1))
not2( )	Binary Logical	!(BinaryPredicate(arg1, arg2))

The following example provides simple tests for each of the built-in basic function object templates. This way, you can see how to use each one, along with their resulting behavior.

} ///:~

To keep this example small, some tools are created. The print( ) template is designed to print any vector<T>, along with an optional message. Since print( ) uses the STL copy( ) algorithm to send objects to cout via an ostream_iterator, the ostream_iterator must know the type of object it is printing, and therefore the print( ) template must know this type also. However, you’ll see in main( ) that the compiler can deduce the type of T when you hand it a vector<T>, so you don’t have to hand it the template argument explicitly; you just say print(x) to print the vector<T> x.

The next two template functions automate the process of testing the various function object templates. There are two since the function objects are either unary or binary. In testUnary( ), you pass a source and destination vector, and a unary function object to apply to the source vector to produce the destination vector. In testBinary( ), there are two source vectors which are fed to a binary function to produce the destination vector. In both cases, the template functions simply turn around and call the transform( ) algorithm, although the tests could certainly be more complex.

For each test, you want to see a string describing what the test is, followed by the results of the test. To automate this, the preprocessor comes in handy; the T( ) and B( ) macros each take the expression you want to execute. They call that expression, then call print( ), passing it the result vector (they assume the expression changes a vector named r and br, respectively), and to produce the message the expression is “string-ized” using the preprocessor. So that way you see the code of the expression that is executed followed by the result vector.

The last little tool is a generator object that creates random bool values. To do this, it gets a random number from rand( ) and tests to see if it’s greater than RAND_MAX/2. If the random numbers are evenly distributed, this should happen half the time.

In main( ), three vector<int> are created: x and y for source values, and r for results. To initialize x and y with random values no greater than 50, a generator of type URandGen is used; this will be defined shortly. Since there is one operation where elements of x are divided by elements of y, we must ensure that there are no zero values of y. This is accomplished using the transform( ) algorithm, taking the source values from y and putting the results back into y. The function object for this is created with the expression:

bind2nd(plus<int>(), 1)

This uses the plus function object that adds two objects together. It is thus a binary function which requires two arguments; we only want to pass it one argument (the element from y) and have the other argument be the value 1. A “binder” does the trick (we will look at these next). The binder in this case says “make a new function object which is the plus function object with the second argument fixed at 1.”

Another of the tests in the program compares the elements in the two vectors for equality, so it is interesting to guarantee that at least one pair of elements is equivalent; in this case element zero is chosen.

Once the two vectors are printed, T( ) is used to test each of the function objects that produces a numerical value, and then B( ) is used to test each function object that produces a Boolean result. The result is placed into a vector<bool>, and when this vector is printed it produces a ‘1’ for a true value and a ‘0’ for a false value.

It’s common to want to take a binary function object and to “bind” one of its arguments to a constant value. After binding, you get a unary function object.

For example, suppose you want to find integers that are less than a particular value, say 20. Sensibly enough, the STL algorithms have a function called find_if( ) that will search through a sequence; however, find_if( ) requires a unary predicate to tell it if this is what you’re looking for. This unary predicate can of course be some function object that you have written by hand, but it can also be created using the built-in function object templates. In this case, the less template will work, but that produces a binary predicate, so we need some way of forming a unary predicate. The binder templates (which work with any binary function object, not just binary predicates) give you two choices:

bind1st(const BinaryFunction& op, const T& t);
bind2nd(const BinaryFunction& op, const T& t);

Both bind t to one of the arguments of op, but bind1st( ) binds t to the first argument, and bind2nd( ) binds t to the second argument. With less, the function object that provides the solution to our exercise is:

bind2nd(less<int>(), 20);

This produces a new function object that returns true if its argument is less than 20. Here it is, used with find_if( ):

} ///:~

The vector<int> a is filled with random numbers between 0 and max. find_if( ) finds the first element in a that satisfies the predicate (that is, which is less than 20) and returns an iterator to it (here, the type of the iterator is actually just int* although I could have been more precise and said vector<int>::iterator instead).

A more interesting algorithm to use is copy_if( ), which isn’t part of the STL but is defined at the end of this chapter. This algorithm only copies an element from the source to the destination if that element satisfies a predicate. So the resulting vector will only contain elements that are less than 20.

Here’s a second example, using a vector<string> and replacing strings that satisfy particular conditions:

} ///:~

This uses another pair of STL algorithms. The first, replace_copy_if( ), copies each element from a source range to a destination range, performing replacements on those that satisfy a particular unary predicate. The second, replace_if( ), doesn’t do any copying but instead performs the replacements directly into the original range.

A binder doesn’t have to produce a unary predicate; it can also create a unary function (that is, a function that returns something other than bool). For example, suppose you’d like to multiply every element in a vector by 10. Using a binder with the transform( ) algorithm does the trick:

} ///:~

Since the third argument to transform( ) is the same as the first, the resulting elements are copied back into the source vector. The function object created by bind2nd( ) in this case produces an int result.

The “bound” argument to a binder cannot be a function object, but it does not have to be a compile-time constant. For example:

} ///:~

Here, an array is filled with random numbers between 0 and 100, and the user provides a value on the command line. In the copy_if( ) call, you can see that the bound argument to bind2nd( ) is the result of the function call atoi( ) (from <cstdlib>).

Any place in an STL algorithm where a function object is required, it’s very conceivable that you’d like to use a function pointer instead. Actually, you can use an ordinary function pointer – that’s how the STL was designed, so that a “function object” can actually be anything that can be dereferenced using an argument list. For example, the rand( ) random number generator can be passed to generate( ) or generate_n( ) as a function pointer, like this:

} ///:~

The “iterators” in this case are just the starting and past-the-end pointers for the array v, and the generator is just a pointer to the standard library rand( ) function. The program repeatedly generates a group of random numbers, then it uses the STL algorithm count_if( ) and a predicate that tells whether a particular element is greater than RAND_MAX/2. The result is the number of elements that match this criterion; this is divided by the total number of elements and multiplied by 100 to produce the percentage of elements greater than the midpoint. If the random number generator is reasonable, this value should hover at around 50% (of course, there are many other tests to determine if the random number generator is reasonable).

The ptr_fun( ) adapters take a pointer to a function and turn it into a function object. They are not designed for a function that takes no arguments, like the one above (that is, a generator). Instead, they are for unary functions and binary functions. However, these could also be simply passed as if they were function objects, so the ptr_fun( ) adapters might at first appear to be redundant. Here’s an example where using ptr_fun( ) and simply passing the address of the function both produce the same results:

} ///:~

The goal of this program is to convert an array of char* which are ASCII representations of floating-point numbers into a vector<double>. After defining this array and the print( ) template (which encapsulates the act of printing a range of elements), you can see transform( ) used with atof( ) as a “naked” pointer to a function, and then a second time with atof passed to ptr_fun( ). The results are the same. So why bother with ptr_fun( )? Well, the actual effect of ptr_fun( ) is to create a function object with an operator( ). This function object can then be passed to other template adapters, such as binders, to create new function objects. As you’ll see a bit later, the SGI extensions to the STL contain a number of other function templates to enable this, but in the Standard C++ STL there are only the bind1st( ) and bind2nd( ) function templates, and these expect binary function objects as their first arguments. In the above example, only the ptr_fun( ) for a unary function is used, and that doesn’t work with the binders. So ptr_fun( ) used with a unary function in Standard C++ really is redundant (note that Gnu g++ uses the SGI STL).

With a binary function and a binder, things can be a little more interesting. This program produces the squares of the input vector d:

} ///:~

Here, ptr_fun( ) is indispensable; bind2nd( ) must have a function object as its first argument and a pointer to function won’t cut it.

A trickier problem is that of converting a member function into a function object suitable for using in the STL algorithms. As a simple example, suppose we have the “shape” problem and would like to apply the draw( ) member function to each pointer in a container of Shape:

} ///:~

The for_each( ) function does just what it sounds like it does: passes each element in the range determined by the first two (iterator) arguments to the function object which is its third argument. In this case we want the function object to be created from one of the member functions of the class itself, and so the function object’s “argument” becomes the pointer to the object that the member function is called for. To produce such a function object, the mem_fun( ) template takes a pointer to member as its argument.

The mem_fun( ) functions are for producing function objects that are called using a pointer to the object that the member function is called for, while mem_fun_ref( ) is used for calling the member function directly for an object. One set of overloads of both mem_fun( ) and mem_fun_ref( ) are for member functions that take zero arguments and one argument, and this is multiplied by two to handle const vs. non-const member functions. However, templates and overloading takes care of sorting all of that out; all you need to remember is when to use mem_fun( ) vs. mem_fun_ref( ).

Suppose you have a container of objects (not pointers) and you want to call a member function that takes an argument. The argument you pass should come from a second container of objects. To accomplish this, the second overloaded form of the transform( ) algorithm is used:

} ///:~

Because the container is holding objects, mem_fun_ref( ) must be used with the pointer-to-member function. This version of transform( ) takes the start and end point of the first range (where the objects live), the starting point of second range which holds the arguments to the member function, the destination iterator which in this case is standard output, and the function object to call for each object; this function object is created with mem_fun_ref( ) and the desired pointer to member. Notice the transform( ) and for_each( ) template functions are incomplete; transform( ) requires that the function it calls return a value and there is no for_each( ) that passes two arguments to the function it calls. Thus, you cannot call a member function that returns void and takes an argument using transform( ) or for_each( ).

Any member function works, including those in the Standard libraries. For example, suppose you’d like to read a file and search for blank lines; you can use the string::empty( ) member function like this:

} ///:~

The blank( ) function uses find_if( ) to locate the first blank line in the given range using mem_fun_ref( ) with string::empty( ). After the file is opened and read into the list, blank( ) is called repeated times to find every blank line in the file. Notice that subsequent calls to blank( ) use the current version of the iterator so it moves forward to the next one. Each time a blank line is found, it is replaced with the characters “A BLANK LINE.” All you have to do to accomplish this is dereference the iterator, and you select the current string.

The SGI STL (mentioned at the end of the previous chapter) also includes additional function object templates, which allow you to write expressions that create even more complicated function objects. Consider a more involved program which converts strings of digits into floating point numbers, like PtrFun2.cpp but more general. First, here’s a generator that creates strings of integers that represent floating-point values (including an embedded decimal point):

#endif // NUMSTRINGGEN_H ///:~

You tell it how big the strings should be when you create the NumStringGen object. The random number generator is used to select digits, and a decimal point is placed in the middle.

The following program (which works with the Standard C++ STL without the SGI extensions) uses NumStringGen to fill a vector<string>. However, to use the Standard C library function atof( ) to convert the strings to floating-point numbers, the string objects must first be turned into char pointers, since there is no automatic type conversion from string to char*. The transform( ) algorithm can be used with mem_fun_ref( ) and string::c_str( ) to convert all the strings to char*, and then these can be transformed using atof:

} ///:~

The SGI extensions to the STL contain a number of additional function object templates that accomplish more detailed activities than the Standard C++ function object templates, including identity (returns its argument unchanged), project1st and project2nd (to take two arguments and return the first or second one, respectively), select1st and select2nd (to take a pair object and return the first or second element, respectively), and the “compose” function templates.

If you’re using the SGI extensions, you can make the above program denser using one of the two “compose” function templates. The first, compose1(f1, f2), takes the two function objects f1 and f2 as its arguments. It produces a function object that takes a single argument, passes it to f2, then takes the result of the call to f2 and passes it to f1. The result of f1 is returned. By using compose1( ), the process of converting the string objects to char*, then converting the char* to a floating-point number can be combined into a single operation, like this:

} ///:~

You can see there’s only a single call to transform( ) now, and no intermediate holder for the char pointers.

The second “compose” function is compose2( ), which takes three function objects as its arguments. The first function object is binary (it takes two arguments), and its arguments are the results of the second and third function objects, respectively. The function object that results from compose2( ) expects one argument, and it feeds that argument to the second and third function objects. Here is an example:

} ///:~

The vector<int> v is first filled with random numbers. To cut these down to size, the transform( ) algorithm is used to divide each value by RAND_MAX/100, which will force the values to be between 0 and 100 (making them more readable). The copy_if( ) algorithm defined later in this chapter is then used, along with a composed function object, to copy all the elements that are greater than or equal to 30 and less than or equal to 40 into the destination vector<int> r. Just to show how easy it is, r is sorted, and then displayed.

The arguments of compose2( ) say, in effect:

(x >= 30) && (x <= 40)

You could also take the function object that comes from a compose1( ) or compose2( ) call and pass it into another “compose” expression ... but this could rapidly get very difficult to decipher.

Instead of all this composing and transforming, you can write your own function objects (without using the SGI extensions) as follows:

} ///:~

There are a few more lines of code, but you can’t deny that it’s much clearer and easier to understand, and therefore to maintain.

We can thus observe two drawbacks to the SGI extensions to the STL. The first is simply that it’s an extension; yes, you can download and use them for free so the barriers to entry are low, but your company may be conservative and decide that if it’s not in Standard C++, they don’t want to use it. The second drawback is complexity. Once you get familiar and comfortable with the idea of composing complicated functions from simple ones you can visually parse complicated expressions and figure out what they mean. However, my guess is that most people will find anything more than what you can do with the Standard, non-extended STL function object notation to be overwhelming. At some point on the complexity curve you have to bite the bullet and write a regular class to produce your function object, and that point might as well be the point where you can’t use the Standard C++ STL. A stand-alone class for a function object is going to be much more readable and maintainable than a complicated function-composition expression (although my sense of adventure does lure me into wanting to experiment more with the SGI extensions...).

As a final note, you can’t compose generators; you can only create function objects whose operator( ) requires one or two arguments.

This section provides a quick reference for when you’re searching for the appropriate algorithm. I leave the full exploration of all the STL algorithms to other references (see the end of this chapter, and Appendix XX), along with the more intimate details of complexity, performance, etc. My goal here is for you to become rapidly comfortable and facile with the algorithms, and I will assume you will look into the more specialized references if you need more depth of detail.

Although you will often see the algorithms described using their full template declaration syntax, I am not doing that here because you already know they are templates, and it’s quite easy to see what the template arguments are from the function declarations. The type names for the arguments provide descriptions for the types of iterators required. I think you’ll find this form is easier to read, while you can quickly find the full declaration in the template header file if for some reason you feel the need.

The names of the iterator classes describe the iterator type they must conform to. The iterator types were described in the previous chapter, but here is a summary:

InputIterator. You (or rather, the STL algorithm and any algorithms you write that use InputIterators) can increment this with operator++ and dereference it with operator* to read the value (and only read the value), but you can only read each value once. InputIterators can be tested with operator== and operator!=. That’s all. Because an InputIterator is so limited, it can be used with istreams (via istream_iterator).

OutputIterator. This can be incremented with operator++, and dereferenced with operator* to write the value (and only write the value), but you can only dereference/write each value once. OutputIterators cannot be tested with operator== and operator!=, however, because you assume that you can just keep sending elements to the destination and that you don’t have to see if the destination’s end marker has been reached. That is, the container that an OutputIterator references can take an infinite number of objects, so no end-checking is necessary. This requirement is important so that an OutputIterator can be used with ostreams (via ostream_iterator), but you’ll also commonly use the “insert” iterators insert_iterator, front_insert_iterator and back_insert_iterator (generated by the helper templates inserter( ), front_inserter( ) and back_inserter( )).

With both InputIterator and OutputIterator, you cannot have multiple iterators pointing to different parts of the same range. Just think in terms of iterators to support istreams and ostreams, and InputIterator and OutputIterator will make perfect sense. Also note that InputIterator and OutputIterator put the weakest restrictions on the types of iterators they will accept, which means that you can use any “more sophisticated” type of iterator when you see InputIterator or OutputIterator used as STL algorithm template arguments.

ForwardIterator. InputIterator and OutputIterator are the most restricted, which means they’ll work with the largest number of actual iterators. However, there are some operations for which they are too restricted; you can only read from an InputIterator and write to an OutputIterator, so you can’t use them to read and modify a range, for example, and you can’t have more than one active iterator on a particular range, or dereference such an iterator more than once. With a ForwardIterator these restrictions are relaxed; you can still only move forward using operator++, but you can both write and read and you can write/read multiple times in each location. A ForwardIterator is much more like a regular pointer, whereas InputIterator and OutputIterator are a bit strange by comparison.

BidirectionalIterator. Effectively, this is a ForwardIterator that can also go backward. That is, a BidirectionalIterator supports all the operations that a ForwardIterator does, but in addition it has an operator--.

RandomAccessIterator. An iterator that is random access supports all the same operations that a regular pointer does: you can add and subtract integral values to move it forward and backward by jumps (rather than just one element at a time), you can subscript it with operator[ ], you can subtract one iterator from another, and iterators can be compared to see which is greater using operator<, operator>, etc. If you’re implementing a sorting routine or something similar, random access iterators are necessary to be able to create an efficient algorithm.

The names used for the template parameter types consist of the above iterator types (sometimes with a ‘1’ or ‘2’ appended to distinguish different template arguments), and may also include other arguments, often function objects.

When describing the group of elements that an operation is performed on, mathematical “range” notation will often be used. In this, the square bracket means “includes the end point” while the parenthesis means “does not include the end point.” When using iterators, a range is determined by the iterator pointing to the initial element, and the “past-the-end” iterator, pointing past the last element. Since the past-the-end element is never used, the range determined by a pair of iterators can thus be expressed as [first, last), where first is the iterator pointing to the initial element and last is the past-the-end iterator.

Most books and discussions of the STL algorithms arrange them according to side effects: non-mutating algorithms don’t change the elements in the range, mutating algorithms do change the elements, etc. These descriptions are based more on the underlying behavior or implementation of the algorithm – that is, the designer’s perspective. In practice, I don’t find this a very useful categorization so I shall instead organize them according to the problem you want to solve: are you searching for an element or set of elements, performing an operation on each element, counting elements, replacing elements, etc. This should help you find the one you want more easily.

Note that all the algorithms are in the namespace std. If you do not see a different header such as <utility> or <numerics> above the function declarations, that means it appears in <algorithm>.

It’s useful to create some basic tools with which to test the algorithms.

Displaying a range is something that will be done constantly, so here is a templatized function that allows you to print any sequence, regardless of the type that’s in that sequence:

#endif // PRINTSEQUENCE_H ///:~

There are two forms here, one that requires you to give an explicit range (this allows you to print an array or a sub-sequence) and one that prints any of the STL containers, which provides notational convenience when printing the entire contents of that container. The second form performs template type deduction to determine the type of T so it can be used in the copy( ) algorithm. That trick wouldn’t work with the first form, so the copy( ) algorithm is avoided and the copying is just done by hand (this could have been done with the second form as well, but it’s instructive to see a template-template in use). Because of this, you never need to specify the type that you’re printing when you call either template function.

The default is to print to cout with newlines as separators, but you can change that. You may also provide a message to print at the head of the output.

Next, it’s useful to have some generators (classes with an operator( ) that returns values of the appropriate type) which allow a sequence to be rapidly filled with different values.

#endif // GENERATORS_H ///:~

To create some interesting values, the SkipGen generator skips by the value skp each time its operator( ) is called. You can initialize both the start value and the skip value in the constructor.

URandGen (‘U’ for “unique”) is a generator for random ints between 0 and mod, with the additional constraint that each value can only be produced once (thus you must be careful not to use up all the values). This is easily accomplished with a set.

CharGen generates chars and can be used to fill up a string (when treating a string as a sequence container). You’ll note that the one member function that any generator implements is operator( ) (with no arguments). This is what is called by the “generate” functions.

The use of the generators and the print( ) functions is shown in the following section.

Finally, a number of the STL algorithms that move elements of a sequence around distinguish between “stable” and “unstable” reordering of a sequence. This refers to preserving the original order of the elements for those elements that are equivalent but not identical. For example, consider a sequence { c(1), b(1), c(2), a(1), b(2), a(2) }. These elements are tested for equivalence based on their letters, but their numbers indicate how they first appeared in the sequence. If you sort (for example) this sequence using an unstable sort, there’s no guarantee of any particular order among equivalent letters, so you could end up with { a(2), a(1), b(1), b(2), c(2), c(1) }. However, if you used a stable sort, it guarantees you will get { a(1), a(2), b(1), b(2), c(1), c(2) }.

To demonstrate the stability versus instability of algorithms that reorder a sequence, we need some way to keep track of how the elements originally appeared. The following is a kind of string object that keeps track of the order in which that particular object originally appeared, using a static map that maps NStrings to Counters. Each NString then contains an occurrence field that indicates the order in which this NString was discovered:

#endif // NSTRING_H ///:~

In the constructors (one that takes a string, one that takes a char*), the simple-looking initialization occurrence(occurMap[s]++) performs all the work of maintaining and assigning the occurrence counts (see the demonstration of the map class in the previous chapter for more details).

To do an ordinary ascending sort, the only operator that’s necessary is NString::operator<( ), however to sort in reverse order the operator>( ) is also provided so that the greater template can be used.

As this is just a demonstration class I am getting away with the convenience of putting the definition of the static member occurMap in the header file, but this will break down if the header file is included in more than one place, so you should normally relegate all static definitions to cpp files.

These algorithms allow you to automatically fill a range with a particular value, or to generate a set of values for a particular range (these were introduced in the previous chapter). The “fill” functions insert a single value multiple times into the container, while the “generate” functions use an object called a generator (described earlier) to create the values to insert into the container.

void fill(ForwardIterator first, ForwardIterator last, const T& value);
void fill_n(OutputIterator first, Size n, const T& value);

fill( ) assigns value to every element in the range [first, last). fill_n( ) assigns value to n elements starting at first.

void generate(ForwardIterator first, ForwardIterator last, Generator gen);
void generate_n(OutputIterator first, Size n, Generator gen);

generate( ) makes a call to gen( ) for each element in the range [first, last), presumably to produce a different value for each element. generate_n( ) calls gen( ) n times and assigns each result to n elements starting at first.

The following example fills and generates into vectors. It also shows the use of print( ):

} ///:~

A vector<string> is created with a pre-defined size. Since storage has already been created for all the string objects in the vector, fill( ) can use its assignment operator to assign a copy of “howdy” to each space in the vector. To print the result, the second form of print( ) is used which simply needs a container (you don’t have to give the first and last iterators). Also, the default newline separator is replaced with a space.

The second vector<string> v2 is not given an initial size so back_inserter must be used to force new elements in instead of trying to assign to existing locations. Just as an example, the other print( ) is used which requires a range.

The generate( ) and generate_n( ) functions have the same form as the “fill” functions except that they use a generator instead of a constant value; here, both generators are demonstrated.

All containers have a method size( ) that will tell you how many elements they hold. The following two algorithms count objects only if they satisfy certain criteria.

IntegralValue count(InputIterator first, InputIterator last,
const EqualityComparable& value);

Produces the number of elements in [first, last) that are equivalent to value (when tested using operator==).

IntegralValue count_if(InputIterator first, InputIterator last, Predicate pred);

Produces the number of elements in [first, last) which each cause pred to return true.

Here, a vector<char> v is filled with random characters (including some duplicates). A set<char> is initialized from v, so it holds only one of each letter represented in v. This set is used to count all the instances of all the different characters, which are then displayed:

} ///:~

The count_if( ) algorithm is demonstrated by counting all the lowercase letters; the predicate is created using the bind2nd( ) and greater function object templates.

These algorithms allow you to move sequences around.

OutputIterator copy(InputIterator, first InputIterator last, OutputIterator destination);

Using assignment, copies from [first, last) to destination, incrementing destination after each assignment. Works with almost any type of source range and almost any kind of destination. Because assignment is used, you cannot directly insert elements into an empty container or at the end of a container, but instead you must wrap the destination iterator in an insert_iterator (typically by using back_inserter( ), or inserter( ) in the case of an associative container).

The copy algorithm is used in many examples in this book.

BidirectionalIterator2 copy_backward(BidirectionalIterator1 first,
BidirectionalIterator1 last, BidirectionalIterator2 destinationEnd);

Like copy( ), but performs the actual copying of the elements in reverse order. That is, the resulting sequence is the same, it’s just that the copy happens in a different way. The source range [first, last) is copied to the destination, but the first destination element is destinationEnd - 1. This iterator is then decremented after each assignment. The space in the destination range must already exist (to allow assignment), and the destination range cannot be within the source range.

void reverse(BidirectionalIterator first, BidirectionalIterator last);
OutputIterator reverse_copy(BidirectionalIterator first, BidirectionalIterator last,
OutputIterator destination);

Both forms of this function reverse the range [first, last). reverse( ) reverses the range in place, while reverse_copy( ) leaves the original range alone and copies the reversed elements into destination, returning the past-the-end iterator of the resulting range.

ForwardIterator2 swap_ranges(ForwardIterator1 first1, ForwardIterator1 last1,
ForwardIterator2 first2);

Exchanges the contents of two ranges of equal size, by moving from the beginning to the end of each range and swapping each set of elements.

void rotate(ForwardIterator first, ForwardIterator middle, ForwardIterator last);
OutputIterator rotate_copy(ForwardIterator first, ForwardIterator middle,
ForwardIterator last, OutputIterator destination);

Swaps the two ranges [first, middle) and [middle, last). With rotate( ), the swap is performed in place, and with rotate_copy( ) the original range is untouched and the rotated version is copied into destination, returning the past-the-end iterator of the resulting range. Note that while swap_ranges( ) requires that the two ranges be exactly the same size, the “rotate” functions do not.

bool next_permutation(BidirectionalIterator first, BidirectionalIterator last);
bool next_permutation(BidirectionalIterator first, BidirectionalIterator last,
StrictWeakOrdering binary_pred);
bool prev_permutation(BidirectionalIterator first, BidirectionalIterator last);
bool prev_permutation(BidirectionalIterator first, BidirectionalIterator last,
StrictWeakOrdering binary_pred);

A permutation is one unique ordering of a set of elements. If you have n unique elements, then there are n! (n factorial) distinct possible combinations of those elements. All these combinations can be conceptually sorted into a sequence using a lexicographical ordering, and thus produce a concept of a “next” and “previous” permutation. Therefore, whatever the current ordering of elements in the range, there is a distinct “next” and “previous” permutation in the sequence of permutations.

The next_permutation( ) and prev_permutation( ) functions re-arrange the elements into their next or previous permutation, and if successful return true. If there are no more “next” permutations, it means that the elements are in sorted order so next_permutation( ) returns false. If there are no more “previous” permutations, it means that the elements are in descending sorted order so previous_permutation( ) returns false.

The versions of the functions which have a StrictWeakOrdering argument perform the comparisons using binary_pred instead of operator<.

void random_shuffle(RandomAccessIterator first, RandomAccessIterator last);
void random_shuffle(RandomAccessIterator first, RandomAccessIterator last
RandomNumberGenerator& rand);

This function randomly rearranges the elements in the range. It yields uniformly distributed results. The first form uses an internal random number generator and the second uses a user-supplied random-number generator.

BidirectionalIterator partition(BidirectionalIterator first, BidirectionalIterator last,
Predicate pred);
BidirectionalIterator stable_partition(BidirectionalIterator first,
BidirectionalIterator last, Predicate pred);

The “partition” functions use pred to organize the elements in the range [first, last) so they are before or after the partition (a point in the range). The partition point is given by the returned iterator. If pred(*i) is true (where i is the iterator pointing to a particular element), then that element will be placed before the partition point, otherwise it will be placed after the partition point.

With partition( ), the order of the elements is after the function call is not specified, but with stable_parition( ) the relative order of the elements before and after the partition point will be the same as before the partitioning process.

This gives a basic demonstration of sequence manipulation:

} ///:~

The best way to see the results of the above program is to run it (you’ll probably want to redirect the output to a file).

The vector<int> v1 is initially loaded with a simple ascending sequence and printed. You’ll see that the effect of copy_backward( ) (which copies into v2, which is the same size as v1) is the same as an ordinary copy. Again, copy_backward( ) does the same thing as copy( ), it just performs the operations in backward order.

reverse_copy( ), however, actually does created a reversed copy, while reverse( ) performs the reversal in place. Next, swap_ranges( ) swaps the upper half of the reversed sequence with the lower half. Of course, the ranges could be smaller subsets of the entire vector, as long as they are of equivalent size.

After re-creating the ascending sequence, rotate( ) is demonstrated by rotating one third of v1 multiple times. A second rotate( ) example uses characters and just rotates two characters at a time. This also demonstrates the flexibility of both the STL algorithms and the print( ) template, since they can both be used with arrays of char as easily as with anything else.

To demonstrate next_permutation( ) and prev_permutation( ), a set of four characters “abcd” is permuted through all n! (n factorial) possible combinations. You’ll see from the output that the permutations move through a strictly-defined order (that is, permuting is a deterministic process).

A quick-and-dirty demonstration of random_shuffle( ) is to apply it to a string and see what words result. Because a string object has begin( ) and end( ) member functions that return the appropriate iterators, it too may be easily used with many of the STL algorithms. Of course, an array of char could also have been used.

Finally, the partition( ) and stable_partition( ) are demonstrated, using an array of NString. You’ll note that the aggregate initialization expression uses char arrays, but NString has a char* constructor which is automatically used.

When partitioning a sequence, you need a predicate which will determine whether the object belongs above or below the partition point. This takes a single argument and returns true (the object is above the partition point) or false (it isn’t). I could have written a separate function or function object to do this, but for something simple, like “the object is greater than ‘b’”, why not use the built-in function object templates? The expression is:

bind2nd(greater<NString>(), "b")

And to understand it, you need to pick it apart from the middle outward. First,

greater<NString>()

produces a binary function object which compares its first and second arguments:

return first > second;

and returns a bool. But we don’t want a binary predicate, and we want to compare against the constant value “b.” So bind2nd( ) says: create a new function object which only takes one argument, by taking this greater<NString>( ) function and forcing the second argument to always be “b.” The first argument (the only argument) will be the one from the vector ns.

You’ll see from the output that with the unstable partition, the objects are correctly above and below the partition point, but in no particular order, whereas with the stable partition their original order is maintained.

All of these algorithms are used for searching for one or more objects within a range defined by the first two iterator arguments.

InputIterator find(InputIterator first, InputIterator last,
const EqualityComparable& value);

Searches for value within a range of elements. Returns an iterator in the range [first, last) that points to the first occurrence of value. If value isn’t in the range, then find( ) returns last. This is a linear search, that is, it starts at the beginning and looks at each sequential element without making any assumptions about the way the elements are ordered. In contrast, a binary_search( ) (defined later) works on a sorted sequence and can thus be much faster.

InputIterator find_if(InputIterator first, InputIterator last, Predicate pred);

Just like find( ), find_if( ) performs a linear search through the range. However, instead of searching for value, find_if( ) looks for an element such that the Predicate pred returns true when applied to that element. Returns last if no such element can be found.

ForwardIterator adjacent_find(ForwardIterator first, ForwardIterator last);
ForwardIterator adjacent_find(ForwardIterator first, ForwardIterator last,
BinaryPredicate binary_pred);

Like find( ), performs a linear search through the range, but instead of looking for only one element it searches for two elements that are right next to each other. The first form of the function looks for two elements that are equivalent (via operator==). The second form looks for two adjacent elements that, when passed together to binary_pred, produce a true result. If two adjacent elements cannot be found, last is returned.

ForwardIterator1 find_first_of(ForwardIterator1 first1, ForwardIterator1 last1,
ForwardIterator2 first2, ForwardIterator2 last2);
ForwardIterator1 find_first_of(ForwardIterator1 first1, ForwardIterator1 last1,
ForwardIterator2 first2, ForwardIterator2 last2, BinaryPredicate binary_pred);

Like find( ), performs a linear search through the range. The first form finds the first element in the first range that is equivalent to any of the elements in the second range. The second form finds the first element in the first range that produces true when passed to binary_pred along with any of the elements in the second range. When a BinaryPredicate is used with two ranges in the algorithms, the element from the first range becomes the first argument to binary_pred, and the element from the second range becomes the second argument.

ForwardIterator1 search(ForwardIterator1 first1, ForwardIterator1 last1,
ForwardIterator2 first2, ForwardIterator2 last2);
ForwardIterator1 search(ForwardIterator1 first1, ForwardIterator1 last1,
ForwardIterator2 first2, ForwardIterator2 last2 BinaryPredicate binary_pred);

Attempts to find the entire range [first2, last2) within the range [first1, last1). That is, it checks to see if the second range occurs (in the exact order of the second range) within the first range, and if so returns an iterator pointing to the place in the first range where the second range begins. Returns last1 if no subset can be found. The first form performs its test using operator==, while the second checks to see if each pair of objects being compared causes binary_pred to return true.

ForwardIterator1 find_end(ForwardIterator1 first1, ForwardIterator1 last1,
ForwardIterator2 first2, ForwardIterator2 last2);
ForwardIterator1 find_end(ForwardIterator1 first1, ForwardIterator1 last1,
ForwardIterator2 first2, ForwardIterator2 last2, BinaryPredicate binary_pred);

The forms and arguments are just like search( ) in that it looks for the second range within the first range, but while search( ) looks for the first occurrence of the second range, find_end( ) looks for the last occurrence of the second range within the first.

ForwardIterator search_n(ForwardIterator first, ForwardIterator last,
Size count, const T& value);
ForwardIterator search_n(ForwardIterator first, ForwardIterator last,
Size count, const T& value, BinaryPredicate binary_pred);

Looks for a group of count consecutive values in [first, last) that are all equal to value (in the first form) or that all cause a return value of true when passed into binary_pred along with value (in the second form). Returns last if such a group cannot be found.

ForwardIterator min_element(ForwardIterator first, ForwardIterator last);
ForwardIterator min_element(ForwardIterator first, ForwardIterator last,
BinaryPredicate binary_pred);

Returns an iterator pointing to the first occurrence of the smallest value in the range (there may be multiple occurrences of the smallest value). Returns last if the range is empty. The first version performs comparisons with operator< and the value r returned is such that
*e < *r
is false for every element e in the range. The second version compares using binary_pred and the value r returned is such that binary_pred (*e, *r) is false for every element e in the range.

ForwardIterator max_element(ForwardIterator first, ForwardIterator last);
ForwardIterator max_element(ForwardIterator first, ForwardIterator last,
BinaryPredicate binary_pred);

Returns an iterator pointing to the first occurrence of the largest value in the range (there may be multiple occurrences of the largest value). Returns last if the range is empty. The first version performs comparisons with operator< and the value r returned is such that
*r < *e
is false for every element e in the range. The second version compares using binary_pred and the value r returned is such that binary_pred (*r, *e) is false for every element e in the range.

void replace(ForwardIterator first, ForwardIterator last,
const T& old_value, const T& new_value);
void replace_if(ForwardIterator first, ForwardIterator last,
Predicate pred, const T& new_value);
OutputIterator replace_copy(InputIterator first, InputIterator last,
OutputIterator result, const T& old_value, const T& new_value);
OutputIterator replace_copy_if(InputIterator first, InputIterator last,
OutputIterator result, Predicate pred, const T& new_value);

Each of the “replace” forms moves through the range [first, last), finding values that match a criterion and replacing them with new_value. Both replace( ) and replace_copy( ) simply look for old_value to replace, while replace_if( ) and replace_copy_if( ) look for values that satisfy the predicate pred. The “copy” versions of the functions do not modify the original range but instead make a copy with the replacements into result (incrementing result after each assignment).

To provide easy viewing of the results, this example will manipulate vectors of int. Again, not every possible version of each algorithm will be shown (some that should be obvious have been omitted).

} ///:~

The example begins with two predicates: PlusOne which is a binary predicate that returns true if the second argument is equivalent to one plus the first argument, and MulMoreThan which returns true if the first argument times the second argument is greater than a value stored in the object. These binary predicates are used as tests in the example.

In main( ), an array a is created and fed to the constructor for vector<int> v. This vector will be used as the target for the search and replace activities, and you’ll note that there are duplicate elements – these will be discovered by some of the search/replace routines.

The first test demonstrates find( ), discovering the value 4 in v. The return value is the iterator pointing to the first instance of 4, or the end of the input range (v.end( )) if the search value is not found.

find_if( ) uses a predicate to determine if it has discovered the correct element. In the above example, this predicate is created on the fly using greater<int> (that is, “see if the first int argument is greater than the second”) and bind2nd( ) to fix the second argument to 8. Thus, it returns true if the value in v is greater than 8.

Since there are a number of cases in v where two identical objects appear next to each other, the test of adjacent_find( ) is designed to find them all. It starts looking from the beginning and then drops into a while loop, making sure that the iterator it has not reached the end of the input sequence (which would mean that no more matches can be found). For each match it finds, the loop prints out the matches and then performs the next adjacent_find( ), this time using it + 2 as the first argument (this way, it moves past the two elements that it already found).

You might look at the while loop and think that you can do it a bit more cleverly, to wit:

}

Of course, this is exactly what I tried at first. However, I did not get the output I expected, on any compiler. This is because there is no guarantee about when the increments occur in the above expression. A bit of a disturbing discovery, I know, but the situation is best avoided now that you’re aware of it.

The next test uses adjacent_find( ) with the PlusOne predicate, which discovers all the places where the next number in the sequence v changes from the previous by one. The same while approach is used to find all the cases.

find_first_of( ) requires a second range of objects for which to hunt; this is provided in the array b. Notice that, because the first range and the second range in find_first_of( ) are controlled by separate template arguments, those ranges can refer to two different types of containers, as seen here. The second form of find_first_of( ) is also tested, using PlusOne.

search( ) finds exactly the second range inside the first one, with the elements in the same order. The second form of search( ) uses a predicate, which is typically just something that defines equivalence, but it also opens some interesting possibilities – here, the PlusOne predicate causes the range { 4, 5, 6 } to be found.

The find_end( ) test discovers the last occurrence of the entire sequence { 11, 11, 11 }. To show that it has in fact found the last occurrence, the rest of v starting from it is printed.

The first search_n( ) test looks for 3 copies of the value 7, which it finds and prints. When using the second version of search_n( ), the predicate is ordinarily meant to be used to determine equivalence between two elements, but I’ve taken some liberties and used a function object that multiplies the value in the sequence by (in this case) 15 and checks to see if it’s greater than 100. That is, the search_n( ) test above says “find me 6 consecutive values which, when multiplied by 15, each produce a number greater than 100.” Not exactly what you normally expect to do, but it might give you some ideas the next time you have an odd searching problem.

min_element( ) and max_element( ) are straightforward; the only thing that’s a bit odd is that it looks like the function is being dereferenced with a ‘*’. Actually, the returned iterator is being dereferenced to produce the value for printing.

To test replacements, replace_copy( ) is used first (so it doesn’t modify the original vector) to replace all values of 8 with the value 47. Notice the use of back_inserter( ) with the empty vector v2. To demonstrate replace_if( ), a function object is created using the standard template greater_equal along with bind2nd to replace all the values that are greater than or equal to 7 with the value -1.

These algorithms provide ways to compare two ranges. At first glance, the operations they perform seem very close to the search( ) function above. However, search( ) tells you where the second sequence appears within the first, while equal( ) and lexicographical_compare( ) simply tell you whether or not two sequences are exactly identical (using different comparison algorithms). On the other hand, mismatch( ) does tell you where the two sequences go out of sync, but those sequences must be exactly the same length.

bool equal(InputIterator first1, InputIterator last1, InputIterator first2);
bool equal(InputIterator first1, InputIterator last1, InputIterator first2
BinaryPredicate binary_pred);

In both of these functions, the first range is the typical one, [first1, last1). The second range starts at first2, but there is no “last2” because its length is determined by the length of the first range. The equal( ) function returns true if both ranges are exactly the same (the same elements in the same order); in the first case, the operator== is used to perform the comparison and in the second case binary_pred is used to decide if two elements are the same.

bool lexicographical_compare(InputIterator1 first1, InputIterator1 last1
InputIterator2 first2, InputIterator2 last2);
bool lexicographical_compare(InputIterator1 first1, InputIterator1 last1
InputIterator2 first2, InputIterator2 last2, BinaryPredicate binary_pred);

These two functions determine if the first range is “lexicographically less” than the second (they return true if range 1 is less than range 2, and false otherwise. Lexicographical equality, or “dictionary” comparison, means that the comparison is done the same way we establish the order of strings in a dictionary, one element at a time. The first elements determine the result if these elements are different, but if they’re equal the algorithm moves on to the next elements and looks at those, and so on. until it finds a mismatch. At that point it looks at the elements, and if the element from range 1 is less than the element from range two, then lexicographical_compare( ) returns true, otherwise it returns false. If it gets all the way through one range or the other (the ranges may be different lengths for this algorithm) without finding an inequality, then range 1 is not less than range 2 so the function returns false.

If the two ranges are different lengths, a missing element in one range acts as one that “precedes” an element that exists in the other range. So {‘a’, ‘b’} lexicographically precedes {‘a’, ‘b’, ‘a’ }.

In the first version of the function, operator< is used to perform the comparisons, and in the second version binary_pred is used.

pair<InputIterator1, InputIterator2> mismatch(InputIterator1 first1,
InputIterator1 last1, InputIterator2 first2);
pair<InputIterator1, InputIterator2> mismatch(InputIterator1 first1,
InputIterator1 last1, InputIterator2 first2, BinaryPredicate binary_pred);

As in equal( ), the length of both ranges is exactly the same, so only the first iterator in the second range is necessary, and the length of the first range is used as the length of the second range. Whereas equal( ) just tells you whether or not the two ranges are the same, mismatch( ) tells you where they begin to differ. To accomplish this, you must be told (1) the element in the first range where the mismatch occurred and (2) the element in the second range where the mismatch occurred. These two iterators are packaged together into a pair object and returned. If no mismatch occurs, the return value is last1 combined with the past-the-end iterator of the second range.

As in equal( ), the first function tests for equality using operator== while the second one uses binary_pred.

Because the standard C++ string class is built like a container (it has begin( ) and end( ) member functions which produce objects of type string::iterator), it can be used to conveniently create ranges of characters to test with the STL comparison algorithms. However, you should note that string has a fairly complete set of native operations, so you should look at the string class before using the STL algorithms to perform operations.

} ///:~

Note that the only difference between s1 and s2 is the capital ‘T’ in s2’s “Test.” Comparing s1 and s1 for equality yields true, as expected, while s1 and s2 are not equal because of the capital ‘T’.

To understand the output of the lexicographical_compare( ) tests, you must remember two things: first, the comparison is performed character-by-character, and second that capital letters “precede” lowercase letters. In the first test, s1 is compared to s1. These are exactly equivalent, thus one is not lexicographically less than the other (which is what the comparison is looking for) and thus the result is false. The second test is asking “does s1 precede s2?” When the comparison gets to the ‘t’ in “test”, it discovers that the lowercase ‘t’ in s1 is “greater” than the uppercase ‘T’ in s2, so the answer is again false. However, if we test to see whether s2 precedes s1, the answer is true.

To further examine lexicographical comparison, the next test in the above example compares s1 with s2 again (which returned false before). But this time it repeats the comparison, trimming one character off the end of s1 (which is first copied into s3) each time through the loop until the test evaluates to true. What you’ll see is that, as soon as the uppercase ‘T’ is trimmed off of s3 (the copy of s1), then the characters, which are exactly equal up to that point, no longer count and the fact that s3 is shorter than s2 is what makes it lexicographically precede s2.

The final test uses mismatch( ). In order to capture the return value, you must first create the appropriate pair p, constructing the template using the iterator type from the first range and the iterator type from the second range (in this case, both string::iterators). To print the results, the iterator for the mismatch in the first range is p.first, and for the second range is p.second. In both cases, the range is printed from the mismatch iterator to the end of the range so you can see exactly where the iterator points.

Because of the genericity of the STL, the concept of removal is a bit constrained. Since elements can only be “removed” via iterators, and iterators can point to arrays, vectors, lists, etc., it is not safe or reasonable to actually try to destroy the elements that are being removed, and to change the size of the input range [first, last) (an array, for example, cannot have its size changed). So instead, what the STL “remove” functions do is rearrange the sequence so that the “removed” elements are at the end of the sequence, and the “un-removed” elements are at the beginning of the sequence (in the same order that they were before, minus the removed elements – that is, this is a stable operation). Then the function will return an iterator to the “new last” element of the sequence, which is the end of the sequence without the removed elements and the beginning of the sequence of the removed elements. In other words, if new_last is the iterator that is returned from the “remove” function, then [first, new_last) is the sequence without any of the removed elements, and [new_last, last) is the sequence of removed elements.

If you are simply using your sequence, including the removed elements, with more STL algorithms, you can just use new_last as the new past-the-end iterator. However, if you’re using a resizable container c (not an array) and you actually want to eliminate the removed elements from the container you can use erase( ) to do so, for example:

c.erase(remove(c.begin(), c.end(), value), c.end());

The return value of remove( ) is the new_last iterator, so erase( ) will delete all the removed elements from c.

The iterators in [new_last, last) are dereferenceable but the element values are undefined and should not be used.

ForwardIterator remove(ForwardIterator first, ForwardIterator last, const T& value);
ForwardIterator remove_if(ForwardIterator first, ForwardIterator last,
Predicate pred);
OutputIterator remove_copy(InputIterator first, InputIterator last,
OutputIterator result, const T& value);
OutputIterator remove_copy_if(InputIterator first, InputIterator last,
OutputIterator result, Predicate pred);

Each of the “remove” forms moves through the range [first, last), finding values that match a removal criterion and copying the un-removed elements over the removed elements (thus effectively removing them). The original order of the un-removed elements is maintained. The return value is an iterator pointing past the end of the range that contains none of the removed elements. The values that this iterator points to are unspecified.

The “if” versions pass each element to pred( ) to determine whether it should be removed or not (if pred( ) returns true, the element is removed). The “copy” versions do not modify the original sequence, but instead copy the un-removed values into a range beginning at result, and return an iterator indicating the past-the-end value of this new range.

ForwardIterator unique(ForwardIterator first, ForwardIterator last);
ForwardIterator unique(ForwardIterator first, ForwardIterator last,
BinaryPredicate binary_pred);
OutputIterator unique_copy(InputIterator first, InputIterator last,
OutputIterator result);
OutputIterator unique_copy(InputIterator first, InputIterator last,
OutputIterator result, BinaryPredicate binary_pred);

Each of the “unique” functions moves through the range [first, last), finding adjacent values that are equivalent (that is, duplicates) and “removing” the duplicate elements by copying over them. The original order of the un-removed elements is maintained. The return value is an iterator pointing past the end of the range that has the adjacent duplicates removed.

Because only duplicates that are adjacent are removed, it’s likely that you’ll want to call sort( ) before calling a “unique” algorithm, since that will guarantee that all the duplicates are removed.

The versions containing binary_pred call, for each iterator value i in the input range:

binary_pred(*i, *(i-1));

and if the result is true then *(i-1) is considered a duplicate.

The “copy” versions do not modify the original sequence, but instead copy the un-removed values into a range beginning at result, and return an iterator indicating the past-the-end value of this new range.

This example gives a visual demonstration of the way the “remove” and “unique” functions work.

} ///:~

The vector<char> v is filled with randomly-generated characters and then copied into a set. Each element of the set is used in a remove statement, but the entire vector v is printed out each time so you can see what happens to the rest of the range, after the resulting endpoint (which is stored in cit).

To demonstrate remove_if( ), the address of the Standard C library function isupper( ) (in <cctype> is called inside of the function object class IsUpper, an object of which is passed as the predicate for remove_if( ). This only returns true if a character is uppercase, so only lowercase characters will remain. Here, the end of the range is used in the call to print( ) so only the remaining elements will appear. The copying versions of remove( ) and remove_if( ) are not shown because they are a simple variation on the non-copying versions which you should be able to use without an example.

The range of lowercase letters is sorted in preparation for testing the “unique” functions (the “unique” functions are not undefined if the range isn’t sorted, but it’s probably not what you want). First, unique_copy( ) puts the unique elements into a new vector using the default element comparison, and then the form of unique( ) that takes a predicate is used; the predicate used is the built-in function object equal_to( ), which produces the same results as the default element comparison.

There is a significant category of STL algorithms which require that the range they operate on be in sorted order.

There is actually only one “sort” algorithm used in the STL. This algorithm is presumably the fastest one, but the implementer has fairly broad latitude. However, it comes packaged in various flavors depending on whether the sort should be stable, partial or just the regular sort. Oddly enough, only the partial sort has a copying version; otherwise you’ll need to make your own copy before sorting if that’s what you want. If you are working with a very large number of items you may be better off transferring them to an array (or at least a vector, which uses an array internally) rather than using them in some of the STL containers.

Once your sequence is sorted, there are many operations you can perform on that sequence, from simply locating an element or group of elements to merging with another sorted sequence or manipulating sequences as mathematical sets.

Each algorithm involved with sorting or operations on sorted sequences has two versions of each function, the first that uses the object’s own operator< to perform the comparison, and the second that uses an additional StrictWeakOrdering object’s operator( )(a, b) to compare two objects for a < b. Other than this there are no differences, so the distinction will not be pointed out in the description of each algorithm.

One STL container (list) has its own built-in sort( ) function which is almost certainly going to be faster than the generic sort presented here (especially since the list sort just swaps pointers rather than copying entire objects around). This means that you’ll only want to use the sort functions here if (a) you’re working with an array or a sequence container that doesn’t have a sort( ) function or (b) you want to use one of the other sorting flavors, like a partial or stable sort, which aren’t supported by list’s sort( ).

void sort(RandomAccessIterator first, RandomAccessIterator last);
void sort(RandomAccessIterator first, RandomAccessIterator last,
StrictWeakOrdering binary_pred);

Sorts [first, last) into ascending order. The second form allows a comparator object to determine the order.

void stable_sort(RandomAccessIterator first, RandomAccessIterator last);
void stable_sort(RandomAccessIterator first, RandomAccessIterator last,
StrictWeakOrdering binary_pred);

Sorts [first, last) into ascending order, preserving the original ordering of equivalent elements (this is important if elements can be equivalent but not identical). The second form allows a comparator object to determine the order.

void partial_sort(RandomAccessIterator first,
RandomAccessIterator middle, RandomAccessIterator last);
void partial_sort(RandomAccessIterator first,
RandomAccessIterator middle, RandomAccessIterator last,
StrictWeakOrdering binary_pred);

Sorts the number of elements from [first, last) that can be placed in the range [first, middle). The rest of the elements end up in [middle, last), and have no guaranteed order. The second form allows a comparator object to determine the order.

RandomAccessIterator partial_sort_copy(InputIterator first, InputIterator last,
RandomAccessIterator result_first, RandomAccessIterator result_last);
RandomAccessIterator partial_sort_copy(InputIterator first,
InputIterator last, RandomAccessIterator result_first,
RandomAccessIterator result_last, StrictWeakOrdering binary_pred);

Sorts the number of elements from [first, last) that can be placed in the range [result_first, result_last), and copies those elements into [result_first, result_last). If the range [first, last) is smaller than [result_first, result_last), then the smaller number of elements is used. The second form allows a comparator object to determine the order.

void nth_element(RandomAccessIterator first,
RandomAccessIterator nth, RandomAccessIterator last);
void nth_element(RandomAccessIterator first,
RandomAccessIterator nth, RandomAccessIterator last,
StrictWeakOrdering binary_pred);

Just like partial_sort( ), nth_element( ) partially orders a range of elements. However, it’s much “less ordered” than partial_sort( ). The only thing that nth_element( ) guarantees is that whatever location you choose will become a dividing point. All the elements in the range [first, nth) will be less than (they could also be equivalent to) whatever element ends up at location nth and all the elements in the range (nth, last] will be greater than whatever element ends up location nth. However, neither range is in any particular order, unlike partial_sort( ) which has the first range in sorted order.

If all you need is this very weak ordering (if, for example, you’re determining medians, percentiles and that sort of thing) this algorithm is faster than partial_sort( ).

The StreamTokenizer class from the previous chapter is used to break a file into words, and each word is turned into an NString and added to a deque<NString>. Once the input file is completely read, a vector<NString> is created from the contents of the deque. The vector is then used to demonstrate the sorting algorithms:

} ///:~

The first class is a binary predicate used to compare two NString objects while ignoring the case of the strings. You can pass the object into the various sort routines to produce an alphabetic sort (rather than the default lexicographic sort, which has all the capital letters in one group, followed by all the lowercase letters).

As an example, try the source code for the above file as input. Because the occurrence numbers are printed along with the strings you can distinguish between an ordinary sort and a stable sort, and you can also see what happens during a partial sort (the remaining unsorted elements are in no particular order). There is no “partial stable sort.”

You’ll notice that the use of the second “comparator” forms of the functions are not exhaustively tested in the above example, but the use of a comparator is the same as in the first part of the example.

The test of nth_element does not use the NString objects because it’s simpler to see what’s going on if ints are used. Notice that, whatever the nth element turns out to be (which will vary from one run to another because of URandGen), the elements before that are less, and after that are greater, but the elements have no particular order other than that. Because of URandGen, there are no duplicates but if you use a generator that allows duplicates you can see that the elements before the nth element will be less than or equal to the nth element.

Once a range is sorted, there are a group of operations that can be used to find elements within those ranges. In the following functions, there are always two forms, one that assumes the intrinsic operator< has been used to perform the sort, and the second that must be used if some other comparison function object has been used to perform the sort. You must use the same comparison for locating elements as you do to perform the sort, otherwise the results are undefined. In addition, if you try to use these functions on unsorted ranges the results will be undefined.

bool binary_search(ForwardIterator first, ForwardIterator last, const T& value);
bool binary_search(ForwardIterator first, ForwardIterator last, const T& value,
StrictWeakOrdering binary_pred);

Tells you whether value appears in the sorted range [first, last).

ForwardIterator lower_bound(ForwardIterator first, ForwardIterator last,
const T& value);
ForwardIterator lower_bound(ForwardIterator first, ForwardIterator last,
const T& value, StrictWeakOrdering binary_pred);

Returns an iterator indicating the first occurrence of value in the sorted range [first, last). Returns last if value is not found.

ForwardIterator upper_bound(ForwardIterator first, ForwardIterator last,
const T& value);
ForwardIterator upper_bound(ForwardIterator first, ForwardIterator last,
const T& value, StrictWeakOrdering binary_pred);

Returns an iterator indicating one past the last occurrence of value in the sorted range [first, last). Returns last if value is not found.

pair<ForwardIterator, ForwardIterator>
equal_range(ForwardIterator first, ForwardIterator last,
const T& value);
pair<ForwardIterator, ForwardIterator>
equal_range(ForwardIterator first, ForwardIterator last,
const T& value, StrictWeakOrdering binary_pred);

Essentially combines lower_bound( ) and upper_bound( ) to return a pair indicating the first and one-past-the-last occurrences of value in the sorted range [first, last). Both iterators indicate last if value is not found.

Here, we can use the approach from the previous example:

} ///:~

The input is forced to be the source code for this file because the word “include” will be used for a find string (since “include” appears many times). The file is tokenized into words that are placed into a deque (a better container when you don’t know how much storage to allocate), and left unsorted in the deque. The deque is copied into a vector via the appropriate constructor, and the vector is sorted and printed.

The binary_search( ) function only tells you if the object is there or not; lower_bound( ) and upper_bound( ) produce iterators to the beginning and ending positions where the matching objects appear. The same effect can be produced more succinctly using equal_range( ) (as shown in the previous chapter, with multimap and multiset).

As before, the first form of each function assumes the intrinsic operator< has been used to perform the sort. The second form must be used if some other comparison function object has been used to perform the sort. You must use the same comparison for locating elements as you do to perform the sort, otherwise the results are undefined. In addition, if you try to use these functions on unsorted ranges the results will be undefined.

OutputIterator merge(InputIterator1 first1, InputIterator1 last1,
InputIterator2 first2, InputIterator2 last2, OutputIterator result);
OutputIterator merge(InputIterator1 first1, InputIterator1 last1,
InputIterator2 first2, InputIterator2 last2, OutputIterator result,
StrictWeakOrdering binary_pred);

Copies elements from [first1, last1) and [first2, last2) into result, such that the resulting range is sorted in ascending order. This is a stable operation.

void inplace_merge(BidirectionalIterator first,
BidirectionalIterator middle, BidirectionalIterator last);
void inplace_merge(BidirectionalIterator first,
BidirectionalIterator middle, BidirectionalIterator last,
StrictWeakOrdering binary_pred);

This assumes that [first, middle) and [middle, last) are each sorted ranges. The two ranges are merged so that the resulting range [first, last) contains the combined ranges in sorted order.

It’s easier to see what goes on with merging if ints are used; the following example also emphasizes how the algorithms (and my own print template) work with arrays as well as containers.

} ///:~

In main( ), instead of creating two separate arrays both ranges will be created end-to-end in the same array a (this will come in handy for the inplace_merge). The first call to merge( ) places the result in a different array, b. For comparison, set_union( ) is also called, which has the same signature and similar behavior, except that it removes the duplicates. Finally, inplace_merge( ) is used to combine both parts of a.

Once ranges have been sorted, you can perform mathematical set operations on them.

bool includes(InputIterator1 first1, InputIterator1 last1,
InputIterator2 first2, InputIterator2 last2);
bool includes (InputIterator1 first1, InputIterator1 last1,
InputIterator2 first2, InputIterator2 last2,
StrictWeakOrdering binary_pred);

Returns true if [first2, last2) is a subset of [first1, last1). Neither range is required to hold only unique elements, but if [first2, last2) holds n elements of a particular value, then [first1, last1) must also hold n elements if the result is to be true.

OutputIterator set_union(InputIterator1 first1, InputIterator1 last1,
InputIterator2 first2, InputIterator2 last2, OutputIterator result);
OutputIterator set_union(InputIterator1 first1, InputIterator1 last1,
InputIterator2 first2, InputIterator2 last2, OutputIterator result,
StrictWeakOrdering binary_pred);

Creates the mathematical union of two sorted ranges in the result range, returning the end of the output range. Neither input range is required to hold only unique elements, but if a particular value appears multiple times in both input sets, then the resulting set will contain the larger number of identical values.

OutputIterator set_intersection (InputIterator1 first1, InputIterator1 last1,
InputIterator2 first2, InputIterator2 last2, OutputIterator result);
OutputIterator set_intersection (InputIterator1 first1, InputIterator1 last1,
InputIterator2 first2, InputIterator2 last2, OutputIterator result,
StrictWeakOrdering binary_pred);

Produces, in result, the intersection of the two input sets, returning the end of the output range. That is, the set of values that appear in both input sets. Neither input range is required to hold only unique elements, but if a particular value appears multiple times in both input sets, then the resulting set will contain the smaller number of identical values.

OutputIterator set_difference (InputIterator1 first1, InputIterator1 last1, InputIterator2 first2, InputIterator2 last2, OutputIterator result);
OutputIterator set_difference (InputIterator1 first1, InputIterator1 last1,
InputIterator2 first2, InputIterator2 last2, OutputIterator result,
StrictWeakOrdering binary_pred);

Produces, in result, the mathematical set difference, returning the end of the output range. All the elements that are in [first1, last1) but not in [first2, last2) are placed in the result set. Neither input range is required to hold only unique elements, but if a particular value appears multiple times in both input sets (n times in set 1 and m times in set 2), then the resulting set will contain max(n-m, 0) copies of that value.

OutputIterator set_symmetric_difference(InputIterator1 first1,
InputIterator1 last1, InputIterator2 first2, InputIterator2 last2,
OutputIterator result);
OutputIterator set_symmetric_difference(InputIterator1 first1,
InputIterator1 last1, InputIterator2 first2, InputIterator2 last2,
OutputIterator result, StrictWeakOrdering binary_pred);

Constructs, in result, the set containing:

Neither input range is required to hold only unique elements, but if a particular value appears multiple times in both input sets (n times in set 1 and m times in set 2), then the resulting set will contain abs(n-m) copies of that value, where abs( ) is the absolute value. The return value is the end of the output range

It’s easiest to see the set operations demonstrated using simple vectors of characters, so you view the sets more easily. These characters are randomly generated and then sorted, but the duplicates are not removed so you can see what the set operations do when duplicates are involved.

} ///:~

After v and v2 are generated, sorted and printed, the includes( ) algorithm is tested by seeing if the entire range of v contains the last half of v, which of course it does so the result should always be true. The vectors v3, v4, v5 and v6 are created to hold the output of set_union( ), set_intersection( ), set_difference( ) and set_symmetric_difference( ), and the results of each are displayed so you can ponder them and convince yourself that the algorithms do indeed work as promised.

The heap operations in the STL are primarily concerned with the creation of the STL priority_queue, which provides efficient access to the “largest” element, whatever “largest” happens to mean for your program. These were discussed in some detail in the previous chapter, and you can find an example there.

As with the “sort” operations, there are two versions of each function, the first that uses the object’s own operator< to perform the comparison, the second that uses an additional StrictWeakOrdering object’s operator( )(a, b) to compare two objects for a < b.

void make_heap(RandomAccessIterator first, RandomAccessIterator last);
void make_heap(RandomAccessIterator first, RandomAccessIterator last,
StrictWeakOrdering binary_pred);

Turns an arbitrary range into a heap. A heap is just a range that is organized in a particular way.

void push_heap(RandomAccessIterator first, RandomAccessIterator last);
void push_heap(RandomAccessIterator first, RandomAccessIterator last,
StrictWeakOrdering binary_pred);

Adds the element *(last-1) to the heap determined by the range [first, last-1). Yes, it seems like an odd way to do things but remember that the priority_queue container presents the nice interface to a heap, as shown in the previous chapter.

void pop_heap(RandomAccessIterator first, RandomAccessIterator last);
void pop_heap(RandomAccessIterator first, RandomAccessIterator last,
StrictWeakOrdering binary_pred);

Places the largest element (which is actually in *first, before the operation, because of the way heaps are defined) into the position *(last-1) and reorganizes the remaining range so that it’s still in heap order. If you simply grabbed *first, the next element would not be the next-largest element so you must use pop_heap( ) if you want to maintain the heap in its proper priority-queue order.

void sort_heap(RandomAccessIterator first, RandomAccessIterator last);
void sort_heap(RandomAccessIterator first, RandomAccessIterator last,
StrictWeakOrdering binary_pred);

This could be thought of as the complement of make_heap( ), since it takes a range that is in heap order and turns it into ordinary sorted order, so it is no longer a heap. That means that if you call sort_heap( ) you can no longer use push_heap( ) or pop_heap( ) on that range (rather, you can use those functions but they won’t do anything sensible). This is not a stable sort.

These algorithms move through the entire range and perform an operation on each element. They differ in what they do with the results of that operation: for_each( ) discards the return value of the operation (but returns the function object that has been applied to each element), while transform( ) places the results of each operation into a destination sequence (which can be the original sequence).

UnaryFunction for_each(InputIterator first, InputIterator last, UnaryFunction f);

Applies the function object f to each element in [first, last), discarding the return value from each individual application of f. If f is just a function pointer then you are typically not interested in the return value, but if f is an object that maintains some internal state it can capture the combined return value of being applied to the range. The final return value of for_each( ) is f.

OutputIterator transform(InputIterator first, InputIterator last,
OutputIterator result, UnaryFunction f);
OutputIterator transform(InputIterator1 first, InputIterator1 last,
InputIterator2 first2, OutputIterator result, BinaryFunction f);

Like for_each( ), transform( ) applies a function object f to each element in the range [first, last). However, instead of discarding the result of each function call, transform( ) copies the result (using operator=) into *result, incrementing result after each copy (the sequence pointed to by result must have enough storage, otherwise you should use an inserter to force insertions instead of assignments).

The first form of transform( ) simply calls f( ) and passes it each object from the input range as an argument. The second form passes an object from the first input range and one from the second input range as the two arguments to the binary function f (note the length of the second input range is determined by the length of the first). The return value in both cases is the past-the-end iterator for the resulting output range.

Since much of what you do with objects in a container is to apply an operation to all of those objects, these are fairly important algorithms and merit several illustrations.

First, consider for_each( ). This sweeps through the range, pulling out each element and passing it as an argument as it calls whatever function object it’s been given. Thus for_each( ) performs operations that you might normally write out by hand. In Stlshape.cpp, for example:

delete *j;

If you look in your compiler’s header file at the template defining for_each( ), you’ll see something like this:

}

Function f looks at first like it must be a pointer to a function which takes, as an argument, an object of whatever InputIterator selects. However, the above template actually only says that you must be able to call f using parentheses and an argument. This is true for a function pointer, but it’s also true for a function object – any class that defines the appropriate operator( ). The following example shows several different ways this template can be expanded. First, we need a class that keeps track of its objects so we can know that it’s being properly destroyed:

#endif // COUNTED_H ///:~

The class Counted keeps a static count of how many Counted objects have been created, and tells you as they are destroyed. In addition, each Counted keeps a char* identifier to make tracking the output easier.

The CountedVector is inherited from vector<Counted*>, and in the constructor it creates some Counted objects, handing each one your desired char*. The CountedVector makes testing quite simple, as you’ll see.

} ///:~

In main( ), the first approach is the simple pointer-to-function, which works but has the drawback that you must write a new Destroy function for each different type. The obvious solution is to make a template, which is shown in the second approach with a templatized function object. On the other hand, approach three also makes sense: template functions work as well.

Since this is obviously something you might want to do a lot, why not create an algorithm to delete all the pointers in a container? This was accomplished with the purge( ) template created in the previous chapter. However, that used explicitly-written code; here, we could use transform( ). The value of transform( ) over for_each( ) is that transform( ) assigns the result of calling the function object into a resulting range, which can actually be the input range. That case means a literal transformation for the input range, since each element would be a modification of its previous value. In the above example this would be especially useful since it’s more appropriate to assign each pointer to the safe value of zero after calling delete for that pointer. Transform( ) can easily do this:

} ///:~

This shows both approaches: using a template function or a templatized function object. After the call to transform( ), the vector contains zero pointers, which is safer since any duplicate deletes will have no effect.

One thing you cannot do is delete every pointer in a collection without wrapping the call to delete inside a function or an object. That is, you don’t want to say something like this:

for_each(a.begin(), a.end(), ptr_fun(operator delete));

You can say it, but what you’ll get is a sequence of calls to the function that releases the storage. You will not get the effect of calling delete for each pointer in a, however; the destructor will not be called. This is typically not what you want, so you will need wrap your calls to delete.

In the previous example of for_each( ), the return value of the algorithm was ignored. This return value is the function that is passed in to for_each( ). If the function is just a pointer to a function, then the return value is not very useful, but if it is a function object, then that function object may have internal member data that it uses to accumulate information about all the objects that it sees during for_each( ).

For example, consider a simple model of inventory. Each Inventory object has the type of product it represents (here, single characters will be used for product names), the quantity of that product and the price of each item:

#endif // INVENTORY_H ///:~

There are member functions to get the item name, and to get and set quantity and value. An operator<< prints the Inventory object to an ostream. There’s also a generator that creates objects that have sequentially-labeled items and random quantities and values. Note the use of the return value optimization in operator( ).

To find out the total number of items and total value, you can create a function object to use with for_each( ) that has data members to hold the totals:

} ///:~

InvAccum’s operator( ) takes a single argument, as required by for_each( ). As for_each( ) moves through its range, it takes each object in that range and passes it to InvAccum::operator( ), which performs calculations and saves the result. At the end of this process, for_each( ) returns the InvAccum object which you can then examine; in this case it is simply printed.

You can do most things to the Inventory objects using for_each( ). For example, if you wanted to increase all the prices by 10%, for_each( ) could do this handily. But you’ll notice that the Inventory objects have no way to change the item value. The programmers who designed Inventory thought this was a good idea, after all, why would you want to change the name of an item? But marketing has decided that they want a “new, improved” look by changing all the item names to uppercase; they’ve done studies and determined that the new names will boost sales (well, marketing has to have something to do ...). So for_each( ) will not work here, but transform( ) will:

} ///:~

Notice that the resulting range is the same as the input range, that is, the transformation is performed in-place.

Now suppose that the sales department needs to generate special price lists with different discounts for each item. The original list must stay the same, and there need to be any number of generated special lists. Sales will give you a separate list of discounts for each new list. To solve this problem we can use the second version of transform( ):

} ///:~

Discounter is a function object that, given an Inventory object and a discount percentage, produces a new Inventory with the discounted price. DiscGen just generates random discount values between 1 and 10 percent to use for testing. In main( ), two vectors are created, one for Inventory and one for discounts. These are passed to transform( ) along with a Discounter object, and transform( ) fills a new vector<Inventory> called discounted.

These algorithms are all tucked into the header <numeric>, since they are primarily useful for performing numerical calculations.

<numeric>
T accumulate(InputIterator first, InputIterator last, T result);
T accumulate(InputIterator first, InputIterator last, T result,
BinaryFunction f);

The first form is a generalized summation; for each element pointed to by an iterator i in [first, last), it performs the operation result = result + *i, where result is of type T. However, the second form is more general; it applies the function f(result, *i) on each element *i in the range from beginning to end. The value result is initialized in both cases by resultI, and if the range is empty then resultI is returned.

Note the similarity between the second form of transform( ) and the second form of accumulate( ).

<numeric>
T inner_product(InputIterator1 first1, InputIterator1 last1,
InputIterator2 first2, T init);
T inner_product(InputIterator1 first1, InputIterator1 last1,
InputIterator2 first2, T init
BinaryFunction1 op1, BinaryFunction2 op2);

Calculates a generalized inner product of the two ranges [first1, last1) and [first2, first2 + (last1 - first1)). The return value is produced by multiplying the element from the first sequence by the “parallel” element in the second sequence, and then adding it to the sum. So if you have two sequences {1, 1, 2, 2} and {1, 2, 3, 4} the inner product becomes:

(1*1) + (1*2) + (2*3) + (2*4)

Which is 17. The init argument is the initial value for the inner product; this is probably zero but may be anything and is especially important for an empty first sequence, because then it becomes the default return value. The second sequence must have at least as many elements as the first.

While the first form is very specifically mathematical, the second form is simply a multiple application of functions and could conceivably be used in many other situations. The op1 function is used in place of addition, and op2 is used instead of multiplication. Thus, if you applied the second version of inner_product( ) to the above sequence, the result would be the following operations:

init = op1(init, op2(2,4));

Thus it’s similar to transform( ) but two operations are performed instead of one.

<numeric>
OutputIterator partial_sum(InputIterator first, InputIterator last,
OutputIterator result);
OutputIterator partial_sum(InputIterator first, InputIterator last,
OutputIterator result, BinaryFunction op);

Calculates a generalized partial sum. This means that a new sequence is created, beginning at result, where each element is the sum of all the elements up to the currently selected element in [first, last). For example, if the original sequence is {1, 1, 2, 2, 3} then the generated sequence is {1, 1 + 1, 1 + 1 + 2, 1 + 1 + 1 + 2 + 2, 1 + 1 + 1 + 2 + 2 + 3}, that is, {1, 2, 4, 6, 9}.

In the second version, the binary function op is used instead of the + operator to take all the “summation” up to that point and combine it with the new value. For example, if you use multiplies<int>( ) as the object for the above sequence, the output is {1, 1, 2, 4, 12}. Note that the first output value is always the same as the first input value.

The return value is the end of the output range [result, result + (last - first) ).

<numeric>
OutputIterator adjacent_difference(InputIterator first, InputIterator last,
OutputIterator result);
OutputIterator adjacent_difference(InputIterator first, InputIterator last,
OutputIterator result, BinaryFunction op);

Calculates the differences of adjacent elements throughout the range [first, last). This means that in the new sequence, the value is the value of the difference of the current element and the previous element in the original sequence (the first value is the same). For example, if the original sequence is {1, 1, 2, 2, 3}, the resulting sequence is {1, 1 – 1, 2 – 1, 2 – 2, 3 – 2}, that is: {1, 0, 1, 0, 1}.

The second form uses the binary function op instead of the – operator to perform the “differencing.” For example, if you use multiplies<int>( ) as the function object for the above sequence, the output is {1, 1, 2, 4, 6}.

The return value is the end of the output range [result, result + (last - first) ).

This program tests all the algorithms in <numeric> in both forms, on integer arrays. You’ll notice that in the test of the form where you supply the function or functions, the function objects used are the ones that produce the same result as form one so the results produced will be exactly the same. This should also demonstrate a bit more clearly the operations that are going on, and how to substitute your own operations.

} ///:~

Note that the return value of inner_product( ) and partial_sum( ) is the past-the-end iterator for the resulting sequence, so it is used as the second iterator in the print( ) function.

Since the second form of each function allows you to provide your own function object, only the first form of the functions is purely “numeric.” You could conceivably do some things that are not intuitively numeric with something like inner_product( ).

Finally, here are some basic tools that are used with the other algorithms; you may or may not use them directly yourself.

<utility>
struct pair;
make_pair( );

This was described and used in the previous chapter and in this one. A pair is simply a way to package two objects (which may be of different types) together into a single object. This is typically used when you need to return more than one object from a function, but it can also be used to create a container that holds pair objects, or to pass more than one object as a single argument. You access the elements by saying p.first and p.second, where p is the pair object. The function equal_range( ), described in the last chapter and in this one, returns its result as a pair of iterators. You can insert( ) a pair directly into a map or multimap; a pair is the value_type for those containers.

If you want to create a pair, you typically use the template function make_pair( ) rather than explicitly constructing a pair object.

<iterator>
distance(InputIterator first, InputIterator last);

Tells you the number of elements between first and last. More precisely, it returns an integral value that tells you the number of times first must be incremented before it is equal to last. No dereferencing of the iterators occurs during this process.

<iterator>
void advance(InputIterator& i, Distance n);

Moves the iterator i forward by the value of n (the iterator can also be moved backward for negative values of n if the iterator is also a bidirectional iterator). This algorithm is aware of bidirectional iterators, and will use the most efficient approach.

<iterator>
back_insert_iterator<Container> back_inserter(Container& x);
front_insert_iterator<Container> front_inserter(Container& x);
insert_iterator<Container> inserter(Container& x, Iterator i);

These functions are used to create iterators for the given containers that will insert elements into the container, rather than overwrite the existing elements in the container using operator= (which is the default behavior). Each type of iterator uses a different operation for insertion: back_insert_iterator uses push_back( ), front_insert_iterator uses push_front( ) and insert_iterator uses insert( ) (and thus it can be used with the associative containers, while the other two can be used with sequence containers). These were shown in some detail in the previous chapter, and also used in this chapter.

const LessThanComparable& min(const LessThanComparable& a,
const LessThanComparable& b);
const T& min(const T& a, const T& b, BinaryPredicate binary_pred);

Returns the lesser of its two arguments, or the first argument if the two are equivalent. The first version performs comparisons using operator< and the second passes both arguments to binary_pred to perform the comparison.

const LessThanComparable& max(const LessThanComparable& a,
const LessThanComparable& b);
const T& max(const T& a, const T& b, BinaryPredicate binary_pred);

Exactly like min( ), but returns the greater of its two arguments.

void swap(Assignable& a, Assignable& b);
void iter_swap(ForwardIterator1 a, ForwardIterator2 b);

Exchanges the values of a and b using assignment. Note that all container classes use specialized versions of swap( ) that are typically more efficient than this general version.

iter_swap( ) is a backwards-compatible remnant in the standard; you can just use swap( ).

Once you become comfortable with the STL algorithm style, you can begin to create your own STL-style algorithms. Because these will conform to the format of all the other algorithms in the STL, they’re easy to use for programmers who are familiar with the STL, and thus become a way to “extend the STL vocabulary.”

The easiest way to approach the problem is to go to the <algorithm> header file and find something similar to what you need, and modify that (virtually all STL implementations provide the code for the templates directly in the header files). For example, an algorithm that stands out by its absence is copy_if( ) (the closest approximation is partition( )), which was used in Binder1.cpp at the beginning of this chapter, and in several other examples in this chapter. This will only copy an element if it satisfies a predicate. Here’s an implementation:

#endif // COPY_IF_H ///:~

The return value is the past-the-end iterator for the destination sequence (the copied sequence).

Now that you’re comfortable with the ideas of the various iterator types, the actual implementation is quite straightforward. You can imagine creating an entire additional library of your own useful algorithms that follow the format of the STL.

The goal of this chapter, and the previous one, was to give you a programmer’s-depth understanding of the containers and algorithms in the Standard Template Library. That is, to make you aware of and comfortable enough with the STL that you begin to use it on a regular basis (or at least, to think of using it so you can come back here and hunt for the appropriate solution). It is powerful not only because it’s a reasonably complete library of tools, but also because it provides a vocabulary for thinking about problem solutions, and because it is a framework for creating additional tools.

Although this chapter and the last did show some examples of creating your own tools, I did not go into the full depth of the theory of the STL that is necessary to completely understand all the STL nooks and crannies to allow you to create tools more sophisticated than those shown here. I did not do this partially because of space limitations, but mostly because it is beyond the charter of this book; my goal here is to give you practical understanding that will affect your day-to-day programming skills.

There are a number of books dedicated solely to the STL (these are listed in the appendices), but the two that I learned the most from, in terms of the theory necessary for tool creation, were first, Generic Programming and the STL by Matthew H. Austern, Addison-Wesley 1999 (this also covers all the SGI extensions, which Austern was instrumental in creating), and second (older and somewhat out of date, but still quite valuable), C++ Programmer’s Guide to the Standard Template Library by Mark Nelson, IDG press 1995.